水泥土搅拌桩的桩径分析

针对搅拌桩施工会引起周围土体的位移及产生很高的超静孔隙水压力的工程现象,首先分析了搅拌桩施工中固化剂的注入体积与膨胀压力、成桩直径的关系。结果表明,5%~10%的注入浆液的体积可以对周围土体产生1.8~3.0倍不排水抗剪强度的膨胀压力,成桩直径比搅拌叶片的名义直径大5%~10%。然后量测室内模型桩、现场搅拌桩的成桩直径,分析了注入浆液的体积与成桩直径的关系。结果表明,对于深度不太大的水泥土搅拌桩,有约45%的注入体积会通过上浮隆起的土体损失掉;大约5%的注入体积通过劈裂裂缝渗入到周围土体中;大约50%的注入体积会转化为成桩直径,使桩体膨胀5%~10%,即实测桩径比搅拌叶片的名义直径大5%~10%。     

A comparative study of prognostic MM5 meteorological modeling with aircraft, wind profiler, lidar, tethered balloon and RASS data over Philadelphia during a 1999 summer episode

This study presents a comparative evaluation of the prognostic meteorological Fifth Generation NCAR Pennsylvania State University Mesoscale Model (MM5) using data from the Northeast Oxidant and Particle Study (NE-OPS) research program collected over Philadelphia, PA during a summer episode in 1999. A set of model simulations utilizing a nested grid of 36 km, 12 km and 4 km horizontal resolutions with 21 layers in the vertical direction was performed for a period of 101 h from July 15, 1999; 12 UTC to July 19, 1999; 17 UTC. The model predictions obtained with 4 km horizontal grid resolution were compared with the NE-OPS observations. Comparisons of model temperature with aircraft data revealed that the model exhibited slight underestimation as noted by previous investigators. Comparisons of model temperature with aircraft and tethered balloon data indicate that the mean absolute error varied up to 1.5 °C. The comparisons of model relative humidity with aircraft and tethered balloon indicate that the mean relative error varied from –11% to –22% for the tethered balloon and from –5% to –30% for the aircraft data. The mean relative error for water vapor mixing ratio with respect to the lidar data exhibited a negative bias consistent with the humidity bias corresponding to aircraft and tethered balloon data. The tendency of MM5 to produce estimates of very low wind speeds, especially in the early-mid afternoon hours, as noted by earlier investigators, is seen in this study also. It is indeed true that the initial fields as well as the fields utilized in the data assimilation also contribute to some of the differences between the model and observations. Studies such as these which compare the grid averaged mean state variables with observations have inherent difficulties. Despite the above limitations, the results of the present study broadly conform to the general traits of MM5 as noted by earlier investigators.     

丙烯腈含量的测定改进

总结了常用测定丙烯腈原料含量方法存在的不足，提出了以１００减去水分和有机杂质的方法来确定丙烯腈含量。并对瓣老测定方法进行对比验证，结果表明，改进的方法操作简单，数据准确，可行。     

夜间建筑施工噪声扰民监测方法探讨

以一家夜间施工工地为例 ,通过对现有夜间建筑施工噪声测量方法及国家和深圳经济特区有关噪声污染定义的分析 ,阐述了夜间施工工地噪声扰民监测方法     

Development of monitoring technology for airborne particulate matter

Particulate matter suspended in the air has adverse effects onhuman health. Its level of concentration is an important parameter in evaluating the degree of hazard it poses to the atmosphere. Conventional methods used in measuring particulatematter are often filter-based, which indicates some disadvantagesbecause such a base requires labor and time. In this study, to achieve real-time measurements, a new electrical method was developed for measuring PM10 and PM2.5 concentrations. The basicprinciple is to electrically charge particles passing through thePM inlet using a corona charger and measure the currents createdby charged particles to obtain the number concentration of particulate matter. A new type inlet based on the particle cupimpactor configuration was designed and its performance was evaluated. A unipolar diffusion charger was developed and thecharger's efficiency was determined experimentally in terms ofPn, which represents the penetration through the charger,P, times the average charge number acquired by a particle,n, for different particle sizes. The correlation was constructed between the PM10 (or the PM2.5) mass concentrationsand the electrical currents due to particles, which were chargedby the diffusion charger.     

上海市机动车污染实时排放预警系统设计与应用

研究上海市机动车污染的动态排放测算和网格化动态排放清单构建,在实时的交通数据和交通环境监测数据的基础上,结合交通模型、机动车排放清单模型等业务模型和算法,依托大数据存储、可视化和GIS等技术,开发了上海市机动车污染物实时排放预警系统,实现了上海市全市道路的机动车动态排放测算、交通环境政策实施情景模拟和网格化排放清单,更新频率为每30 min一次,包含PM、NOx、CO、SO2、VOCs等污染物和9种车型。系统建成后直接服务于首届中国国际进口博览会,为大气污染排放实时总量跟踪评估、污染源管控措施分析及监测成因分析等提供了有力的实时数据和技术支撑。     

evaluation of a measurement method for forest vegetation in a large-scale ecological survey

We evaluate a field method for determining species richness andcanopy cover of vascular plants for the Forest Health MonitoringProgram (FHM), an ecological survey of U.S. forests. Measurementsare taken within 12 1-m² quadrats on 1/15 ha plots in FHM.Species richness and cover are determined for four height classes(strata) within each quadrat and aggregated by stratum over the entireplot. We estimated (1) the agreement between experienced trainers andinexperienced technicians who collected the data on this survey(accuracy) and (2) the agreement among the technicians (precision) forresults on species richness and cover from 3 test plots at 3 timeintervals. The methods appear to be highly precise, although somediscrepancies with the values obtained by the trainers were found.Trainers found significantly more species in the ground stratum (0–0.6 m) and measured significantly more cover in the uppermost stratum(>4.9 m). The proportion of variation due to measurement error andtemporal variability was less than 13% for species richness (all strata)and cover (all but one stratum). This indicates that the method issuitable for monitoring changes in species richness and canopy coverfor a large-scale synoptic monitoring project such as FHM.     

The implementation of a measurement system for brushless DC motor parameters

Most of the energy conversion in industrial devices and equipment is completed by the motor. The acquirement of motor parameters becomes very important for designing the motor drives. The aim of this paper is to design and implement a motor measurement system. Through the processing of an Advanced RISC Machines (ARM) microcontroller, the various parameters of motors such as input voltage, input current, input power, motor speed, and motor torque can be obtained. Consequently, the torque constant, load torque, viscous friction, and the inertia of the motor are calculated and achieved. The motor parameters can be commanded and displayed in the designed human interface of a PC via USB communication. The hardware system designed in this system includes an ARM microcontroller, an inverter, a voltage sensor, a current sensor, a torque sensor, and power supply. The software programming is developed under the Visual Studio 2012 environment development platform using the C language. Finally, the prototype of the motor measurement system is completed and verified. The experimental results for the motor parameters and torque/speed characteristic are demonstrated and show the feasibility of the complete designed system.     

航空器场内失事应急演练评估指标体系与评估方法研究

针对目前我国民用运输机场航空器场内失事应急救援综合演练缺乏有效评估体系的现状，通过对演练过程进行系统分析，构建航空器场内失事应急救援演练评估指标体系，涵盖消防、医疗、公安、媒体应对、运行指挥中心、地服、飞行区7个组织部门的2级指标。结合航空器场内失事救援的业务特点以及指标体系内在逻辑，设计相应的评估方法，对开展的航空器场内失事应急演练进行评估；最后，以国内2个机场的相关应急演练过程为典型示例，进行应用分析。研究结果表明:构建的演练评估指标体系及评估方法能较好地应用于实际应急演练过程，进而在演练评估结果和建议的基础上，实现应急演练的持续改进。     

论中国环境预警制度的法治化--以行政权力的规制为核心

环境预警制度蕴含了一项使行政权力合法扩张的"对应性架构",即预警级别与"强制型"或"限制型"措施之间的充分必要关系。在制度运行过程当中,环境行政权力却出现了"选择性失语"和"运动式肆意"的问题,具体表现为:一是预警级别发布时的"隐匿"与"从轻",从而对公民健康权益保护不足;二是预警状态下环境行政权力的扩张过度,使得对个人自由与企业经济自由侵害过度。由于环境治理领域"被害人-加害人"二元对立关系的模糊化、趋同化甚至同一化,传统公法学体系中的权力制约理论无法对预警状态下多样化和多层次性的行政权力进行有效地规制。那么,便有必要对现有的环境预警制度进行修正与纠偏。因此,可以从"对应性架构"的载体及其前后两端入手,对环境预警制度进行法治化建构。具体而言,对环境预警的载体"应急预案"进行形式改造,提高环境应急预案的规范层级,完善环境应急预案制定、修改等程序性规定;明确不同预警级别设定的规范层级,将作为被宪法所保护的客观利益——生态环境利益与经济利益的边界——通过"前端"预警标准予以划分;对预警状态下行政权力的"外部"制约程序予以完善。基于预警级别标准体系的划分,可以通过司法程序对"后端"环境应急预案进行"附带性审查",同时,赋予私主体直接针对预警状态下具有"外化"法效力的内部行政行为提起行政诉讼的诉权。